Pneumatic and hydropneumatic presses up to 320 kN



	Pneumatic and hydropneumatic presses up to 320 kN

FORCE-STROKE CONTROL

PNEUMATIC
PRESSING UNITS

Safety, silentness, accuracy, stiffness, oxidation protection, easy use: these are the most important features of the PRNA series of pneumatic presses, characterised by cylinders in extruded anodised aluminium with hidden tie rods.
As well as the standard support structures with adequately sized ports and ranges, customised versions are also available upon request.

PRNA 150

PRNA 500

PRNA 1000

PRNA 1000+1000

HYDROPNEUMATIC
PRESSING UNITS

The PCM hydropneumatic press models use a CM power unit now available with extruded anodised aluminium cylinders. They can be used in any position, thanks to the external compensation tank with a mechanical spring.
The support structures are available either in our standard versions or customised.

PCM 2000

PCM 4000-7000

PCM 7000-10000 compact

PCM 10000-15000-24000-32000

PCM 2000/P-4000/P-7000/P

PCM 10000/P-15000/P-24000/P-32000/P

PNEUMATIC PRESSES
WITH TWO-HAND CONTROL

The presses with two-hand control are certified for manual loading and unloading.
Safety, silentness, accuracy, stiffness, oxidation protection, easy use: these are the most important features of the PRNA series of pneumatic presses, characterised by cylinders in extruded anodised aluminium with hidden tie rods.
As well as the standard support structures with adequately sized ports and ranges, customised versions are also available upon request.

standard model

versions with signal muting
control function and timer

HYDROPNEUMATIC PRESSES
WITH TWO-HAND CONTROL

The presses with two-hand control are certified for manual loading and unloading.
The support structures are available either in our standard versions or customised.
The presses with two-hand controls have a redundant two way pneumatic circuit monitored thanks to two logical blocks controlled by an inherently safe valve model MCP-A.

standard model

versions with signal muting
control function and timer

DIAL FEED UNITS WITH PRESS

POWER UNITS

Combined units which allow a simple automation of assembly and machining works.

compact table models

models with integrated table - photoelectric barriers

models with integrated table - rotating mechanical barrier

CM power units are used on all GPA hydropneumatic presses and take advantage of the following features:

standard stroke 60 mm approach, + 10 mm working stroke, longer or shorter strokes on request

working stroke with progressive application of power using the pressure intensifier hydraulic circuit,

adjustment of the working stroke provided as a standard on all models.

power units CM